<![CDATA[A-ONE CRANE CO., LTD]]> http://http://www.a-onecrane.com Thu, 26 Mar 2020 12:10:26 +0800 3600 News update(2020/May/12 11:08:01) http://http://www.a-onecrane.com/supplier_news.html News update (2020/May/12 11:08:01) news Tue, 12 May 2020 11:08:01 +0800 <![CDATA[Parallel shaft gear motor Brand:A-one Parallel Shaft Gearmotor--GM2 (GM2-SERIES(A-one))(2019/Oct/25 09:59:05)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-motor.html?CID=1_1 The gearmotor, or gear box, is designed with helical gear which makes it operate smoothly and quietly. It is a complete motive force system with an electric motor and an integrated reduction gear train, characterizing high torque and low backlash. Normally the gearmotor is flexible in sizes as they can lift a building when they are large while they can also drive a clock when they are in small size.

The A-One gearmotor applies modular design. Ratios are designed and selected to correspond with the normal usage of customers.  Each of the unit for the gear is available for foot or flange mounting and can also be installed in any directions and positions provided.

A-One gearmotor has been a manuacturer of solutions within geared motors for almost 4 decades. We provide products of the highest quality with focus on flexible solutions, reliability and customer understanding. Please do not hesitate and contact to us for further information today!

Specification:
Max. output torque: 250Nm
Ratio of gearmotor: 4-224
Power: 0.18kW-1.1kW
Output speed: 750rpm-4rpm
Output hollow shaft: 25mm ( with key way or spline )
                                                     

Options for gearmotor：
Output flange
Output shaft
Spring operated disc brake, DC-Voltage
Forced cooling fan
Manual release of brake
Space heater
Thermal protector

 

(2019/Oct/25 09:59:05)]]> Fri, 25 Oct 2019 09:59:05 +0800 <![CDATA[Parallel shaft gear motor Brand:A-one Parallel Shaft Gear Motor--GM3 (GM3-SERIES(A-one))(2019/Oct/25 10:00:06)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-motor1-2.html?CID=1_1 The A-One Crane is experienced in manufacturing gear units for decades.  With the advanced technique, the parallel gear unit is available for foot or flange mounting. The product can also be installed in any directions and positions provided.  Moreover, the rations are designed and selected to correspond with the normal usage of customers.

We have a high standard on the product quality as well as the quality control.  By providing qualified parallel gear unit, we also offer fine customer services to satisfy our customers. We dedicate ourselves into improving the quality as well as innovating new techniques.  So please do not hesitate and contact with us for our quality parallel gear unit today. 


 
Specification:
Max. output torque: 550Nm
Ratio: 4-224
Power: 0.18kW-2.2 kW
Output speed: 750rpm-4rpm
Output hollow shaft: key way 30mm；spline 30mm or 35mm 

Options：
Output flange
Output shaft
Spring operated disc brake, DC-Voltage
Forced cooling fan
Manual release of brake
Space heater
Thermal protector

 

 

(2019/Oct/25 10:00:06)]]> Fri, 25 Oct 2019 10:00:06 +0800 <![CDATA[Parallel shaft gear motor Brand:A-one Parallel Gear Motor--GM3.5 (GM3.5-SERIES(A-one))(2019/Oct/25 10:15:47)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-motor1-3.html?CID=1_1 The A-one parallel gear motor applies modular design. Ratios are designed and selected to correspond with the normal usage of customers .The units are available for foot or flange mounting and can be installed in any directions and positions provided. With the power from 0.37 kw to 3.7 kw and the ration from 4 to 224, the parallel gear motor provides not only good function of the motor but also various options for you to choose from.



Gear boxes are designed with helical gear which makes it operate smoothly and quietly. The parallel gear motor is characteristic of high torque and low backlash. Please do not hestitate and contact us for more information about the quality product today. We are ready to serve you the best!  


A-ONE CRANE CO., LTD. is ISO certified company and receives CE marking certification for all products. We guarantee that we only offer you the best service and products. If you have any interest about our parallel gear motors, please contact us soon for details.


 

 

Specification:Max. output torque: 900Nm
Ratio: 4-224
Power: 0.37kW-3.7kW
Output speed: 750rpm-4rpm
Output hollow shaft: 40mm ( with key way or spline )



Options：
Output flange
Output shaft
Spring operated disc brake, DC-Voltage
Forced cooling fan
Manual release of brake
Space heater
Thermal protector

 

(2019/Oct/25 10:15:47)]]> Fri, 25 Oct 2019 10:15:47 +0800 <![CDATA[Parallel shaft gear motor Brand:A-one Geared Motor--GM4 (GM4-SERIES(A-one))(2019/Oct/25 10:16:35)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-motor1-4.html?CID=1_1 As a leading manufacturer in the industry, A-One Crane adopts modular design for geared motor supplied. Ratios are designed and selected to correspond with the normal usage of customers. The unit of the geared motor is available for foot or flange mounting and can be installed in any directions and positions provided. By providing ranges of the options, A-One has therefore got the reputation in the machinery industry.  

Moreover, the geared motor boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.  As a well-experienced manufacturer of gearmotor, we are confident of providing you the qualified products to meet your needs.

We believe our company will be the best choice for your need, and we are looking forward to serving you in the near future. Hence, if you have any question about geared motor, you are welcomed to contact us for details.


Specification:
Max. output torque: 1100Nm
Ratio: 4-224
Power: 0.37kW-3.7kW
Output speed: 750rpm-4rpm
Output hollow shaft: 45mm ( with key way or spline )
 

Options：
Output flange
Output shaft
Spring operated disc brake, DC-Voltage
Forced cooling fan
Manual release of brake
Space heater
Thermal protector

 

(2019/Oct/25 10:16:35)]]> Fri, 25 Oct 2019 10:16:35 +0800 <![CDATA[Parallel shaft gear motor Brand:A-one Parallel shaft gear motor--GM4.5 (GM4.5-SERIES(A-one))(2019/Oct/25 10:17:20)]]> http://http://www.a-onecrane.com/test.html?CID=1_1 The A-one parallel gear motor applies modular design. Ratios are designed and selected to correspond with the normal usage of customers. The units are available for foot or flange mounting and can be installed in any directions and positions provided. With the power from 0.37 kW to 5.5 kW and the ratio from 4 to 224, the parallel gear motor provides not only good function of the motor but also various options for you to choose from.


Gear boxes are designed with helical gear which makes it operate smoothly and quietly. The parallel gear motor is characteristic of high torque and low backlash. Please do not hesitate and contact us for more information about the quality product today.
 

Specification:
Max. output torque: 1650Nm
Ratio: 4-224
Power: 0.37kW-5.5kW
Output speed: 750rpm-4rpm
Output hollow shaft: key way 50mm ; spline 55mm

 

Options：
Output flange
Output shaft
Spring operated disc brake, DC-Voltage
Forced cooling fan
Manual release of brake
Space heater
Thermal protector

 

(2019/Oct/25 10:17:20)]]> Fri, 25 Oct 2019 10:17:20 +0800 <![CDATA[Parallel shaft gear motor Brand:A-one Parallel shaft gear motor--GM5 (GM5-SERIES(A-one))(2019/Oct/25 10:18:03)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-motor1-5.html?CID=1_1 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear motors applies modular design. Ratios are designed and selected to correspond with the normal usage of customers .Gear units are available for foot or flange mounting and can be installed in any directions and positions provided.

Specification:
Max. output torque: 2200Nm
Ratio:4-224
Power: 0.75kW-7.5kW
                                                     Output speed: 750rpm-4rpm
                                                     Output hollow shaft: key way 55mm；spline 55mm 
 

Options：
Output flange
Output shaft
Spring operated disc brake, DC-Voltage
Forced cooling fan
Manual release of brake
Space heater
Thermal protector

 

(2019/Oct/25 10:18:03)]]> Fri, 25 Oct 2019 10:18:03 +0800 <![CDATA[Parallel shaft gear motor Brand:A-one Parallel shaft gear motor--GM6 (GM6-SERIES(A-one))(2019/Oct/25 10:20:22)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-motor1-6.html?CID=1_1 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear motors applies modular design. Ratios are designed and selected to correspond with the normal usage of customers .Gear units are available for foot or flange mounting and can be installed in any directions and positions provided.

Specification:
Max. output torque: 4500Nm
Ratio: 4-224
Power: 1.1kW-18.5kW
                                                     Output speed: 750rpm-4rpm
                                                     Output hollow shaft: key way 70mm ; spline 65mm

Options：
Output flange
Output shaft
Spring operated disc brake, DC-Voltage
Forced cooling fan
Manual release of brake
Space heater
Thermal protector 

(2019/Oct/25 10:20:22)]]> Fri, 25 Oct 2019 10:20:22 +0800 <![CDATA[Parallel shaft gear motor Brand:A-one Parallel shaft gear motor--GM7 (GM7-SERIES(A-one))(2019/Oct/25 10:19:59)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-motor1-7.html?CID=1_1 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear motors applies modular design. Ratios are designed and selected to correspond with the normal usage of customers .Gear units are available for foot or flange mounting and can be installed in any directions and positions provided.

Specification:
Max. output torque: 7200Nm
Ratio: 4 ~ 224
Power: 1.1kW ~ 30kW
                                                      Output speed: 750rpm-4rpm
                                                      Output hollow shaft: key way 80mm

Options：
Output flange
Output shaft
Spring operated disc brake, DC-Voltage
Forced cooling fan
Manual release of brake
Space heater
Thermal protector

 

(2019/Oct/25 10:19:59)]]> Fri, 25 Oct 2019 10:19:59 +0800 <![CDATA[Parallel shaft gear motor Brand:A-one Parallel shaft gear motor--GM7.5 (GM7.5-SERIES(A-one))(2019/Oct/25 10:21:04)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-motor-.html?CID=1_1 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear motors applies modular design. Ratios are designed and selected to correspond with the normal usage of customers. Gear units are available for foot or flange mounting and can be installed in any directions and positions provided. 




Specification：
Max. output torque: 11000Nm
Ratio: 11 ~ 224
Power: 3.7kW ~ 45kW
Output speed: 320rpm ~ 4rpm
Output hollow shaft: key way 90mm or 100mm

 

Options：
Output flange
Output shaft
Spring operated disc brake, DC-Voltage
Forced cooling fan
Manual release of brake
Space heater
Thermal protector

(2019/Oct/25 10:21:04)]]> Fri, 25 Oct 2019 10:21:04 +0800 <![CDATA[Parallel shaft gear motor Brand:A-one Parallel shaft gear motor--GM8 (GM8-SERIES(A-one))(2019/Oct/25 10:21:43)]]> http://http://www.a-onecrane.com/GM8.html?CID=1_1 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear motors applies modular design. Ratios are designed and selected to correspond with the normal usage of customers. Gear units are available for foot or flange mounting and can be installed in any directions and positions provided.

Specification：
Max. output torque: 16500Nm
Ratio: 11 ~ 224
Power: 7.5kW ~ 45kW
                                                      Output speed: 320rpm ~ 4rpm
                                                      Output hollow shaft: key way 100mm or 110mm

 more pictures...gear motor                      Options：
    Output flange
    Output shaft
    Spring operated disc brake, DC-Voltage
    Forced cooling fan
    Manual release of brake
    Space heater
    Thermal protector






a-one

(2019/Oct/25 10:21:43)]]> Fri, 25 Oct 2019 10:21:43 +0800 <![CDATA[Parallel shaft gear units c/w servo motors Brand:A-one Product Features of GM(GM2~GM8) (Product Features of GM(GM2~GM8)(A-one))(2020/Jan/6 10:30:29)]]> http://http://www.a-onecrane.com/Product-Features-of-GMGM2GM8.html?CID=2_2 A-one gear units are characteristic of high torque, low backlash, low noise, smooth operation, etc, which is specially designed for the need of high performance of mechanical equipments. 

For example, when applying with all types of motors, such as servo motors or inverter motors to reduce revolutions per minute, it results in large output torque to equipment application. In addition, All gears of the A-one gear unit are effectively modified through professional technology to achieve highly efficient and precise operation, which make it perfectly work with servo systems to efficaciously control accuracy, reduce load inertia and increase output torque. 

Generally, A-one gear units are ideal for extensively applying to automatic equipments, mechanical devices, packing facilities, etc for industries.

The A-one gear unit applies modular design and provides various ratios for choice. It is available for foot or flange mounting and can be installed in any directions and positions requested. Combining with a connecting flange, it can match with any brands of inverter motors or servo motors for diverse mechanical applications

A-one Gear unit specification：
Max. output torque: 250~16500Nm
Ratio: 4~224
Output hollow shaft: 25~110mm ( with key way or spline )

 

(2020/Jan/6 10:30:29)]]> Mon, 6 Jan 2020 10:30:29 +0800 <![CDATA[GM gear units GM gear units ( custom-made ratio 224~2200 ) (Product Features of GM gear units ( custom-made ratio 224~2200 ) (A-one))(2020/Apr/20 22:10:55)]]> http://http://www.a-onecrane.com/GM-gear-units--custom-made-ratio-2242200.html?CID=3_3 In addition to standard ratio 4~224, we also manufacture custom-made ratio from 224 to 2200.

A-one Gear unit specification：
Output torque: 250~16500Nm
Ratio: 224~2200
Output hollow shaft: 25~110mm ( with keyway or spline )

Options：
Torque arm assembly set

Output flange
Output shaft

(2020/Apr/20 22:10:55)]]> Mon, 20 Apr 2020 22:10:55 +0800 <![CDATA[Parallel shaft gear units Brand:A-one Parallel shaft gear units--GM2 (GM2-SERIES(A-one))(2019/Oct/25 10:22:52)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-units.html?CID=4_4 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear units apply modular design. Ratios are designed and selected to correspond with the normal usage of customers .Gear units are available for foot or flange mounting and can be installed in any directions and positions provided.

Specification:
Max. output torque: 250Nm
Ratio: 4-224
Adapter motor power: 0.18kW-0.75 kW
                                                      Output speed: 750rpm-4rpm
                                                      Output hollow shaft: key way 25mm ; spline 25mm or 30mm

 

Options：
Output flange
Output shaft

 

(2019/Oct/25 10:22:52)]]> Fri, 25 Oct 2019 10:22:52 +0800 <![CDATA[Parallel shaft gear units Brand:A-one Parallel Gear Units--GM3 (GM3-SERIES(A-one))(2019/Oct/25 10:23:22)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-units2-2.html?CID=4_4 The gear boxes along with every quality parallel gear units are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash. All parallel gear units use high precision, hardened and ground helical gears for maximum transmission of power and high efficiency.

The A-one parallel gear units apply modular design. Ratios are designed and selected to correspond with the normal usage of customer .All of the gear units are available for foot or flange mounting and can be installed in any directions and positions provided.

With rich experience, A-one has reliable reputation in the industry for manufacturing quality parallel gear unit. If you are looking for high standard gears and related products, please do not hesitate and contact with us today for further information.


Specification:
Max. output torque: 550Nm
Ratio: 4-224
Adapter motor power: 0.18kW .2.2 kW
Output speed: 750rpm-4rpm
Output hollow shaft: 30mm ( with key way or spline )
 

Options：
Output flange
Output shaft

 

(2019/Oct/25 10:23:22)]]> Fri, 25 Oct 2019 10:23:22 +0800 <![CDATA[Parallel shaft gear units Brand:A-one Parallel shaft gear units--GM3.5 (GM3.5-SERIES(A-one))(2019/Oct/25 10:24:12)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-units2-3.html?CID=4_4 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear units apply modular design. Ratios are designed and selected to correspond with the normal usage of customers .Gear units are available for foot or flange mounting and can be installed in any directions and positions provided.

Specification:
Max. output torque: 900Nm
Ratio: 4-224
Adapter motor power: 0.37kW-3.7kW
                                                      Output speed: 750rpm-4rpm
                                                      Output hollow shaft: key way 35mm or 40mm ; spline 35mm

Options：
Output flange
Output shaft

 

(2019/Oct/25 10:24:12)]]> Fri, 25 Oct 2019 10:24:12 +0800 <![CDATA[Parallel shaft gear units Brand:A-one Parallel shaft gear units--GM4 (GM4-SERIES(A-one))(2019/Oct/25 10:25:24)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-units2-4.html?CID=4_4 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear units apply modular design. Ratios are designed and selected to correspond with the normal usage of customers .Gear units are available for foot or flange mounting and can be installed in any directions and positions provided.

Specification:
Max. output torque: 1100Nm
Ratio: 4-224
Adapter motor power: 0.37kW-3.7 kW
                                                      Output speed: 750rpm-4rpm
                                                      Output hollow shaft: 45mm ( with key way or spline )

Options：
Output flange
Output shaft

 

(2019/Oct/25 10:25:24)]]> Fri, 25 Oct 2019 10:25:24 +0800 <![CDATA[Parallel shaft gear units Brand:A-one Parallel shaft gear units--GM4.5 (GM4.5-SERIES(A-one))(2019/Oct/25 10:26:09)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-units45.html?CID=4_4 The A-one parallel gear motor applies modular design. Ratios are designed and selected to correspond with the normal usage of customers. The units are available for foot or flange mounting and can be installed in any directions and positions provided. With the power from 0.37 kW to 5.5 kW and the ratio from 4 to 224, the parallel gear motor provides not only good function of the motor but also various options for you to choose from.


Gear boxes are designed with helical gear which makes it operate smoothly and quietly. The parallel gear motor is characteristic of high torque and low backlash. Please do not hesitate and contact us for more information about the quality product today.
 

Specification:
Max. output torque: 1650Nm
Ratio: 4-224
Power: 0.37kW-5.5kW
Output speed: 750rpm-4rpm
Output hollow shaft: key way 50mm ; spline 55mm

 

Options：
Output flange
Output shaft
Spring operated disc brake, DC-Voltage
Forced cooling fan
Manual release of brake
Space heater
Thermal protector

(2019/Oct/25 10:26:09)]]> Fri, 25 Oct 2019 10:26:09 +0800 <![CDATA[Parallel shaft gear units Brand:A-one Parallel shaft gear units--GM5 (GM5-SERIES(A-one))(2019/Oct/25 10:26:55)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-units2-5.html?CID=4_4 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear units apply modular design. Ratios are designed and selected to correspond with the normal usage of customers .Gear units are available for foot or flange mounting and can be installed in any directions and positions provided.

Specification:
Max. output torque: 2200Nm
Ratio: 4-224
Adapter motor power: 1.1kW-7.5 kW
Output speed: 750rpm-4rpm
Output hollow shaft: 55mm ( with key way or spline )

 

Options：
Output flange
Output shaft

 

(2019/Oct/25 10:26:55)]]> Fri, 25 Oct 2019 10:26:55 +0800 <![CDATA[Parallel shaft gear units Brand:A-one Parallel shaft gear units--GM6 (GM6-SERIES(A-one))(2019/Oct/25 10:27:38)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-units2-6.html?CID=4_4 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear units apply modular design. Ratios are designed and selected to correspond with the normal usage of customers .Gear units are available for foot or flange mounting and can be installed in any directions and positions provided.

Specification:
Max. output torque: 4500Nm
Ratio: 4-224
Adapter motor power: 1.1kW-18.5 kW
Output speed: 750rpm-4rpm
Output hollow shaft: key way 70mm ; spline 65mm

 

Options：
Output flange
Output shaft

 

(2019/Oct/25 10:27:38)]]> Fri, 25 Oct 2019 10:27:38 +0800 <![CDATA[Parallel shaft gear units Brand:A-one Parallel shaft gear units--GM7 (GM7-SERIES(A-one))(2019/Oct/25 10:28:14)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-units2-7.html?CID=4_4 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear units apply modular design. Ratios are designed and selected to correspond with the normal usage of customers .Gear units are available for foot or flange mounting and can be installed in any directions and positions provided.

Specification:
Max. output torque: 7200Nm
Ratio: 4-224
Adapter motor power: 1.1kW-30 kW
Output speed: 750rpm-4rpm
Output hollow shaft: key way 80mm
 

Options：
Output flange
Output shaft

 

(2019/Oct/25 10:28:14)]]> Fri, 25 Oct 2019 10:28:14 +0800 <![CDATA[Parallel shaft gear units Brand:A-one Parallel shaft gear units--GM7.5 (GM7.5-SERIES(A-one))(2019/Oct/25 10:28:49)]]> http://http://www.a-onecrane.com/Parallel-shaft-gear-units-.html?CID=4_4 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear units apply modular design. Ratios are designed and selected to correspond with the normal usage of customers. Gear units are available for foot or flange mounting and can be installed in any directions and positions provided. 




Specification:
Max. output torque: 11000Nm
Ratio: 11 ~ 224
Adapter motor power: 3.7kW ~45 kW
Output speed: 320rpm ~ 4rpm
Output hollow shaft: key way 90mm or 100mm

Options：
Output flange
Output shaft

(2019/Oct/25 10:28:49)]]> Fri, 25 Oct 2019 10:28:49 +0800 <![CDATA[Parallel shaft gear units Brand:A-one Parallel shaft gear units--GM8 (GM8-SERIES(A-one))(2019/Oct/25 10:31:36)]]> http://http://www.a-onecrane.com/GM8-gear-units.html?CID=4_4 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear units apply modular design. Ratios are designed and selected to correspond with the normal usage of customers. Gear units are available for foot or flange mounting and can be installed in any directions and positions provided.

Specification:
Max. output torque: 16500Nm
Ratio: 11 ~ 224
Adapter motor power: 1.1kW ~45 kW
                                                      Output speed: 320rpm ~ 4rpm
                                                      Output hollow shaft: key way 100mm or 110mm

Options：
Output flange
Output shaft

 

(2019/Oct/25 10:31:36)]]> Fri, 25 Oct 2019 10:31:36 +0800 <![CDATA[Gear motor for end carriage Brand:CHEC、A-one Gear motor for end carriage LK-H-0.4A (LK-H-0.4A SERIES(CHEC))(2019/Oct/25 10:32:10)]]> http://http://www.a-onecrane.com/Gear-motor-for-end-carriage.html?CID=5_5 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life. The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.

Specification:
Power: 0.37kW x 4P ,0.25kW x 6P,0.25/0.12kW x 4/8P,
0.25/0.08 x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 7.3
With output pinion ( M3.0, M3.5, M4.0 )

(2019/Oct/25 10:32:10)]]> Fri, 25 Oct 2019 10:32:10 +0800 <![CDATA[Gear motor for end carriage Brand:CHEC、A-one Gear motor for end carriage LK-0.75A (LK-0.75A SERIES(CHEC))(2019/Oct/25 10:32:47)]]> http://http://www.a-onecrane.com/Gear-motor-for-end-carriage3-2.html?CID=5_5 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.

Specification:
Power: 0.75kWx 4P or 0.55kWx6P, 0.37/0.18kW x 4/8P ,
0.37/0.12kW x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 7.6
With output pinion ( M3.0, M3.5, M4.0, M5.0 )

(2019/Oct/25 10:32:47)]]> Fri, 25 Oct 2019 10:32:47 +0800 <![CDATA[Gear motor for end carriage Brand:CHEC、A-one Gear motor for end carriage LK-T-1.1A (LK-T-1.1A SERIES(CHEC))(2019/Oct/25 10:34:49)]]> http://http://www.a-onecrane.com/Gear-motor-for-end-carriage3-3.html?CID=5_5 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life. The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.

Specification:
Power: 1.1kWx 4P or 0.75kWx6P, 0.55/0.25kW x 4/8P ,
0.55/0.18kW x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 7.6
With output pinion ( M3.0, M3.5, M4.0, M5.0 )

(2019/Oct/25 10:34:49)]]> Fri, 25 Oct 2019 10:34:49 +0800 <![CDATA[Gear motor for end carriage Brand:CHEC、A-one Gear motor for end carriage LK-HR-0.75A ( low speed ) (LK-HR-0.75A SERIES(CHEC))(2019/Oct/25 10:36:24)]]> http://http://www.a-onecrane.com/Gear-motor-for-end-carriage3-4.html?CID=5_5 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.

Specification:
Power: 0.75kWx 4P or 0.55kWx6P, 0.37/0.18kW x 4/8P,
0.37/0.12kW x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 37.8
With output pinion ( M3.0, M3.5, M4.0, M5.0 )

(2019/Oct/25 10:36:24)]]> Fri, 25 Oct 2019 10:36:24 +0800 <![CDATA[Gear motor for end carriage Brand:CHEC、A-one Gear Motor for End Carriage LK-1.1A/ LK-H-1.1A (LK-1.1A/ LK-H-1.1A SERIES(CHEC))(2019/Oct/25 10:37:19)]]> http://http://www.a-onecrane.com/Gear-motor-for-end-carriage3-5.html?CID=5_5 The gear motor for end carriage, is actually the gear boxes that are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life. The motor has high starting torque and high output load, and the brake of motor can be easily adjusted by brake torque.  In this way, the gear motor for end carriage can increase the efficiency of your work.  

As a well-experienced manufacturer of crane trolley and gear motor, A-ONE CRANE is one of the most reliable supplier in the industry.  By serving products like gear motor for end carriage, you can find that the products are in fine quality.  Moreover, the after-sale service is professional as well.  If you are interested in our product, please feel free and contact us for more details today!
 


Specification:
Power: 1.1kWx 4P or 0.75kWx6P, 0.55/0.25kW x 4/8P, 0.55/0.18kW x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 8.0,11.5
With output pinion ( M3.5, M4.0, M5.0 )

(2019/Oct/25 10:37:19)]]> Fri, 25 Oct 2019 10:37:19 +0800 <![CDATA[Gear motor for end carriage Brand:CHEC、A-one Gear motor for end carriage LK-1.5A/ LK-H-1.5A (LK-1.5A/ LK-H-1.5A SERIES(CHEC))(2019/Oct/25 10:38:05)]]> http://http://www.a-onecrane.com/Gear-motor-for-end-carriage3-6.html?CID=5_5 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.

Specification:
Power: 1.5kWx 4P or 1.1kWx6P, 0.75/0.37kW x 4/8P ,
0.75/0.25kW x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 16,10
With output pinion ( M3.5, M4.0, M5.0, M6.0 )

(2019/Oct/25 10:38:05)]]> Fri, 25 Oct 2019 10:38:05 +0800 <![CDATA[Gear motor for end carriage Brand:CHEC、A-one Gear motor for end carriage LK-2.2A/ LK-H-2.2A (LK-2.2A/ LK-H-2.2A SERIES(CHEC))(2019/Oct/25 10:38:45)]]> http://http://www.a-onecrane.com/Gear-motor-for-end-carriage3-7.html?CID=5_5 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.

Specification:
Power: 2.2kWx 4P or 1.5kWx6P, 1.5/0.75kW x 4/8P ,
1.5/0.5kW x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 16,10
With output pinion ( M3.5, M4.0, M5.0, M6.0 )

(2019/Oct/25 10:38:45)]]> Fri, 25 Oct 2019 10:38:45 +0800 <![CDATA[Gear motor for end carriage Brand:CHEC、A-one Gear motor for end carriage LK-3.7A/ LK-H-3.7A (LK-3.7A/ LK-H-3.7A SERIES(CHEC))(2019/Oct/25 10:39:47)]]> http://http://www.a-onecrane.com/Gear-motor-for-end-carriage3-8.html?CID=5_5 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.

Specification:
Power: 3.7kWx 4P or 2.2kWx6P, 2.2/1.1kW x 4/8P ,
2.2/0.75kW x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 17.5,11,5
With output pinion ( M4.0, M5.0, M6.0, M8.0 )

(2019/Oct/25 10:39:47)]]> Fri, 25 Oct 2019 10:39:47 +0800 <![CDATA[Gear motor for end carriage Brand:CHEC、A-one Gear motor for end carriage LK-5.5A/ LK-H-5.5A (LK-5.5A/ LK-H-5.5A SERIES(CHEC))(2019/Oct/25 10:40:26)]]> http://http://www.a-onecrane.com/Gear-motor-for-end-carriage3-9.html?CID=5_5 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.

Specification:
Power: 5.5kWx 4P or 3.7kWx6P,3.0/1.5kW x 4/8P ,
3.0/1.0kW x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 17.5,11,5
With output pinion ( M4.0, M5.0, M6.0, M8.0 )

(2019/Oct/25 10:40:26)]]> Fri, 25 Oct 2019 10:40:26 +0800 <![CDATA[Gear motor for end carriage Brand:CHEC、A-one Gear motor for end carriage LK-7.5A/ LK-H-7.5A (LK-7.5A/ LK-H-7.5A SERIES(CHEC))(2019/Oct/25 10:41:07)]]> http://http://www.a-onecrane.com/Gear-motor-for-end-carriage3-10.html?CID=5_5 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.

Specification:
Power: 7.5kWx 4P or 5.5kWx6P, 3.7/1.8kW x 4/8P,
3.7/1.2kW x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 17.5,11,5
With output pinion ( M4.0, M5.0, M6.0, M8.0 )

(2019/Oct/25 10:41:07)]]> Fri, 25 Oct 2019 10:41:07 +0800 <![CDATA[Gear motor for end carriage Brand:CHEC、A-one Gear motor for end carriage NK-0.37A (NK-0.37A SERIES(A-one))(2019/Oct/25 10:41:55)]]> http://http://www.a-onecrane.com/nk037series.html?CID=5_5 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life. The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.

Specification:
Power: 0.37kWx 4P or 0.25kWx6P, 0.18/0.09kW x 4/8P, 0.18/0.06kW x 4/12P, 0.18/0.04kW x 2/8P
Power supply: 200V~600V/(50/60Hz)
Ratio: 7.6
With output pinion ( M3.0, M3.5, M4.0, M5.0 )

(2019/Oct/25 10:41:55)]]> Fri, 25 Oct 2019 10:41:55 +0800 <![CDATA[Gear motor for end carriage Brand:CHEC、A-one Gear motor for end carriage NK-0.75A (NK-0.75A SERIES(A-one))(2019/Oct/25 10:42:39)]]> http://http://www.a-onecrane.com/nk075aseries.html?CID=5_5 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life. The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.

Specification:
Power: 0.75kWx 4P or 0.55kWx6P, 0.37/0.18kW x 4/8P, 0.37/0.12kW x 4/12P, 0.37/0.09kW x 2/8P
Power supply: 200V~600V/(50/60Hz)
Ratio: 7.6
With output pinion ( M3.0, M3.5, M4.0, M5.0 ) 

(2019/Oct/25 10:42:39)]]> Fri, 25 Oct 2019 10:42:39 +0800 <![CDATA[Gear motor for end carriage Brand:CHEC、A-one Gear motor for end carriage NK-1.1A (NK-1.1A SERIES(A-one))(2019/Oct/25 10:44:06)]]> http://http://www.a-onecrane.com/nk11aseries.html?CID=5_5 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.

Specification:
Power: 1.1kWx 4P or 0.75kWx6P, 0.55/0.25kW x 4/8P, 0.55/0.18kW x 4/12P, 0.55/0.12kW x 2/8P
Power supply: 200V~600V/(50/60Hz)
Ratio: 8.0,11.5
With output pinion ( M3.5, M4.0, M5.0 )

 

(2019/Oct/25 10:44:06)]]> Fri, 25 Oct 2019 10:44:06 +0800 <![CDATA[Gear motor for end carriage Brand:CHEC、A-one Gear motor for end carriage NK-1.5A (NK-1.5A SERIES(A-one))(2019/Oct/25 10:44:45)]]> http://http://www.a-onecrane.com/nk15aseries.html?CID=5_5 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life. The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.


Specification:
Power: 1.5kWx 4P or 1.1kWx6P, 0.75/0.37kW x 4/8P , 0.75/0.25kW x 4/12P 0.75/0.18kW x2/8P
Power supply: 200V~600V/(50/60Hz)
Ratio: 16,10
With output pinion ( M3.5, M4.0, M5.0, M6.0 ) 

 

(2019/Oct/25 10:44:45)]]> Fri, 25 Oct 2019 10:44:45 +0800 <![CDATA[Gear motor for end carriage Brand:CHEC、A-one Gear motor for end carriage NK-2.2A (NK-2.2A SERIES(A-one))(2019/Oct/25 10:45:58)]]> http://http://www.a-onecrane.com/nk22aseries.html?CID=5_5 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.

Specification:
Power: 2.2kWx 4P or 1.5kWx6P, 1.5/0.75kW x 4/8P, 1.5/0.5kW x 4/12P 1.5/0.37Kw x 2/8P
Power supply: 200V~600V/(50/60Hz)
Ratio: 16,10
With output pinion ( M3.5, M4.0, M5.0, M6.0 ) 

 

(2019/Oct/25 10:45:58)]]> Fri, 25 Oct 2019 10:45:58 +0800 <![CDATA[Gear motor for trolley Brand:CHEC、A-one Gear motor for trolley LK-S-0.25A (LK-S-0.25A SERIES(CHEC))(2019/Oct/25 10:46:34)]]> http://http://www.a-onecrane.com/Gear-motor-for-end-carriage2.html?CID=6_6 The gear boxes are designed which makes it operate smoothly and quietly. It is characteristic of high strength and low backlash.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.


Specification:
Power: 0.25kWx 4P ,0.18kWx6P
Power supply: 200V~600V/(50/60Hz)
Ratio: 5.6 ,7.1
With output pinion ( M3.0, M3.5, M4.0 )

(2019/Oct/25 10:46:34)]]> Fri, 25 Oct 2019 10:46:34 +0800 <![CDATA[Gear motor for trolley Brand:CHEC、A-one Gear motor for for trolley LK-S-0.4A (LK-S-0.4A SERIES(CHEC))(2019/Oct/25 10:47:39)]]> http://http://www.a-onecrane.com/Gear-motor-for-end-carriage3.html?CID=6_6 The gear boxes are designed which makes it operate smoothly and quietly. It is characteristic of high strength and low backlash.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.


Specification:
Power: 0.37kWx 4P, 0.25kWx6P
Power supply: 200V~600V/(50/60Hz)
Ratio: 5.6 ,7.1
With output pinion ( M3.0, M3.5, M4.0 )

(2019/Oct/25 10:47:39)]]> Fri, 25 Oct 2019 10:47:39 +0800 <![CDATA[Gear motor for trolley Brand:CHEC、A-one Gear motor for end carriage LK-R-0.75A (LK-R-0.75A SERIES(CHEC))(2019/Oct/25 10:48:13)]]> http://http://www.a-onecrane.com/LK4_4.html?CID=6_6 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life. The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.

Specification:
Power: 0.75kWx 4P or 0.55kWx6P, 0.37/0.18kW x 4/8P ,
0.37/0.12kW x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 7.3
With output pinion ( M3.0, M3.5, M4.0 )

(2019/Oct/25 10:48:13)]]> Fri, 25 Oct 2019 10:48:13 +0800 <![CDATA[Gear motor for trolley Brand:CHEC、A-one Gear motor for end carriage LK-0.4A (LK-0.4A SERIES(CHEC))(2019/Oct/25 10:48:50)]]> http://http://www.a-onecrane.com/LK4_6.html?CID=6_6 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life. The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.
 


Specification:
Power: 0.37kWx 4P or 0.25kWx6P
Power supply: 200V~600V/(50/60Hz)
Ratio: 7.6
With output pinion ( M3.0, M3.5, M4.0, M5.0 )

(2019/Oct/25 10:48:50)]]> Fri, 25 Oct 2019 10:48:50 +0800 <![CDATA[Angular gear motor for bogie crane Brand:CHEC、A-one Angular gear motor for bogie crane LK-W-1.1A (LK-W-1.1A SERIES(CHEC))(2019/Oct/25 10:49:52)]]> http://http://www.a-onecrane.com/LK5_1.html?CID=7_7 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.
 


Specification:
Power: 1.1kW x 4P , 0.75kW x 6P, 0.55/0.25kW x 4/8P, 0.55/0.18 x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 16,10
With output pinion ( M3.5, M4.0, M5.0, M6.0 )

(2019/Oct/25 10:49:52)]]> Fri, 25 Oct 2019 10:49:52 +0800 <![CDATA[Angular gear motor for bogie crane Brand:CHEC、A-one Angular gear motor for bogie crane LK-W-1.5A (LK-W-1.5A SERIES(CHEC))(2019/Oct/25 10:50:28)]]> http://http://www.a-onecrane.com/LK5_2.html?CID=7_7 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.
 


Specification:
Power: 1.5kW x 4P , 1.1kW x 6P, 0.75/0.37kW x 4/8P, 0.75/0.25 x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 16,10
With output pinion ( M3.5, M4.0, M5.0, M6.0 )

(2019/Oct/25 10:50:28)]]> Fri, 25 Oct 2019 10:50:28 +0800 <![CDATA[Angular gear motor for bogie crane Brand:CHEC、A-one Angular gear motor for bogie crane LK-W-2.2 (LK-W-2.2 A SERIES(CHEC))(2019/Oct/25 10:51:09)]]> http://http://www.a-onecrane.com/LK5_3.html?CID=7_7 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.
 


Specification:
Power: 2.2kW x 4P , 1.5kW x 6P, 1.5/0.75kW x 4/8P, 1.5/0.5 x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 16,10
With output pinion ( M3.5, M4.0, M5.0, M6.0 )

(2019/Oct/25 10:51:09)]]> Fri, 25 Oct 2019 10:51:09 +0800 <![CDATA[Angular gear motor for bogie crane Brand:CHEC、A-one Angular gear motor for bogie crane LK-AFW-3.7A (LK-AFW-3.7A SERIES(CHEC))(2019/Oct/25 10:51:32)]]> http://http://www.a-onecrane.com/LK5_4.html?CID=7_7 The gear boxes are designed with soft start which makes it operate smoothly and quietly.

It is characteristic of reducing impact and increasing long life. The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.

Specification:
Power: 3.7kWx 4P or 2.2kWx6P, 2.2/1.1kW x 4/8P , 2.2/0.75kW x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 18.95,13,65
With output pinion ( M5.0, M6.0, M7.0, M8.0 )

(2019/Oct/25 10:51:32)]]> Fri, 25 Oct 2019 10:51:32 +0800 <![CDATA[Angular gear motor for bogie crane Brand:CHEC、A-one Angular gear motor for bogie crane LK-AFW-5.5A (LK-AFW-5.5A SERIES(CHEC))(2019/Oct/25 10:52:14)]]> http://http://www.a-onecrane.com/LK5_5.html?CID=7_7 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.
 


Specification:
Power: 5.5kWx 4P or 3.7kWx6P, 3.0/1.5kW x 4/8P , 3.0/1.0kW x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 18.95,13,65
With output pinion ( M5.0, M6.0, M7.0, M8.0 )

(2019/Oct/25 10:52:14)]]> Fri, 25 Oct 2019 10:52:14 +0800 <![CDATA[Angular gear motor for bogie crane Brand:CHEC、A-one Angular gear motor for bogie crane LK-AFW-7.5A (LK-AFW-7.5A SERIES(CHEC))(2017/Dec/11 14:48:11)]]> http://http://www.a-onecrane.com/LK5_6.html?CID=7_7 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.
 


Specification:
Power: 7.5kWx 4P or 5.5kWx6P, 3.7/1.8kW x 4/8P,
 3.7/1.2kW x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 18.95,13,65
With output pinion ( M5.0, M6.0, M7.0, M8.0 )

(2017/Dec/11 14:48:11)]]> Mon, 11 Dec 2017 14:48:11 +0800 <![CDATA[Angular gear motor for bogie crane Brand:CHEC、A-one Angular gear motor for bogie crane LK-AFW-11A (LK-AFW-11A SERIES(CHEC))(2017/Dec/11 14:48:27)]]> http://http://www.a-onecrane.com/LK5_7.html?CID=7_7 The gear boxes are designed with soft start which makes it operate smoothly and quietly. It is characteristic of reducing impact and increasing long life.

The motor are high starting torque and high output load, The brake of motor can be easily adjusted brake torque.
 


Specification:
Power: 11kWx 4P or 7.5kWx6P, 5.5/2.5kW x 4/8P,  
5.5/1.85kW x 4/12P
Power supply: 200V~600V/(50/60Hz)
Ratio: 18.95,13,65
With output pinion ( M5.0, M6.0, M7.0, M8.0 )

(2017/Dec/11 14:48:27)]]> Mon, 11 Dec 2017 14:48:27 +0800 <![CDATA[Angular gear motor for bogie crane Brand:CHEC、A-one Angular gear motor for bogie crane GM5-W (GM5-W SERIES(A-one))(2019/Oct/25 10:53:14)]]> http://http://www.a-onecrane.com/LK5_8.html?CID=7_7 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear units apply modular design. Ratios are designed and selected to correspond with the normal usage of customers .Gear units are available for foot or flange mounting and can be installed in any directions and positions provided.
 

Specification:
Max. output torque: 2200Nm
Ratio: 4 ~ 224
Adapter motor power: 1.1kW ~7.5 kW
Output speed: 750rpm ~ 4rpm
Output hollow shaft: 55mm ( with key way or spline )

(2019/Oct/25 10:53:14)]]> Fri, 25 Oct 2019 10:53:14 +0800 <![CDATA[Angular gear motor for bogie crane Brand:CHEC、A-one Angular gear motor for bogie crane GM6-W (GM6-W SERIES(A-one))(2017/Dec/11 14:48:58)]]> http://http://www.a-onecrane.com/LK5_9.html?CID=7_7 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear units apply modular design. Ratios are designed and selected to correspond with the normal usage of customers .Gear units are available for foot or flange mounting and can be installed in any directions and positions provided.
 

Specification:
Max. output torque: 4500Nm
Ratio: 4 ~ 224
Adapter motor power: 1.1kW ~18.5 kW
Output speed: 750rpm ~ 4rpm
Output hollow shaft: key way 70mm ; spline 65mm

(2017/Dec/11 14:48:58)]]> Mon, 11 Dec 2017 14:48:58 +0800 <![CDATA[Angular gear motor for bogie crane Brand:CHEC、A-one Angular gear motor for bogie crane GM7-W (GM7-W SERIES(A-one))(2017/Dec/11 14:49:10)]]> http://http://www.a-onecrane.com/LK5_10.html?CID=7_7 Gear boxes are designed with helical gear which makes it operate smoothly and quietly. It is characteristic of high torque and low backlash.

The A-one gear units apply modular design. Ratios are designed and selected to correspond with the normal usage of customers .Gear units are available for foot or flange mounting and can be installed in any directions and positions provided.
 

Specification:
Max. output torque: 7200Nm
Ratio: 4 ~ 224
Adapter motor power: 1.1kW ~30 kW
Output speed: 750rpm ~ 4rpm
Output hollow shaft: key way 80mm

(2017/Dec/11 14:49:10)]]> Mon, 11 Dec 2017 14:49:10 +0800 <![CDATA[End carriage for crane Brand:A-one End Carriage for Crane Trolley EC-125 (EC-125(A-one))(2017/Dec/11 14:49:23)]]> http://http://www.a-onecrane.com/EC6_1.html?CID=8_8 As a well-experienced manufacturer of crane end carriages and crane trolley, the end carriage for crane travel unit system supplied by A-One Crane, is surely an advanced design of rail mounting assembly for moving loads at variable speed, and the crane trolley is the ideal choice for most lifting operations with specification on wheel diameter as 125mm and 1m to 2m of the wheel base. Our crane end carriages are manufactured under standard quality control for your need.

The end carriage and crane trolley for crane travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability of the crane end carriages. 

If you are looking for some good devices for the lifting or rigging, we the A-One Crane is here to provide you the qualified crane trolley as well as carriages for crane to help.  We serve not only the carriage in good quality but also with fine quality.  At the same time, we provide the caring customers' services.  Besides, the OEM/ODM is highly welcome.  Please do not hestitate and contact with us for further information about the crane end carriages.


 

Specification:
Wheel diameter: 125mm
Wheel base: 1m~2m
Max. wheel load: 35kN

(2017/Dec/11 14:49:23)]]> Mon, 11 Dec 2017 14:49:23 +0800 <![CDATA[End carriage for crane Brand:A-one End carriage for crane EC-160 (EC-160(A-one))(2017/Dec/11 14:49:38)]]> http://http://www.a-onecrane.com/EC6_2.html?CID=8_8 The A-ONE end carriage travel unit system is an advanced design of rail mounting assembly for moving loads at variable speed, and it is the ideal choice for most lifting operations.

The travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability.


Specification:
Wheel diameter: 160mm
Wheel base: 1m~3m
Max. wheel load: 50kN 

(2017/Dec/11 14:49:38)]]> Mon, 11 Dec 2017 14:49:38 +0800 <![CDATA[End carriage for crane Brand:A-one End carriage for crane EC-200 (EC-200(A-one))(2017/Dec/11 14:49:52)]]> http://http://www.a-onecrane.com/EC6_3.html?CID=8_8 The A-ONE end carriage travel unit system is an advanced design of rail mounting assembly for moving loads at variable speed, and it is the ideal choice for most lifting operations.

The travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability.


Specification:
Wheel diameter: 200mm
Wheel base: 1.2m~3.5m
Max. wheel load: 80kN

(2017/Dec/11 14:49:52)]]> Mon, 11 Dec 2017 14:49:52 +0800 <![CDATA[End carriage for crane Brand:A-one End carriage for crane EC-250 (EC-250(A-one))(2017/Dec/11 14:50:07)]]> http://http://www.a-onecrane.com/EC6_4.html?CID=8_8 The A-ONE end carriage travel unit system is an advanced design of rail mounting assembly for moving loads at variable speed, and it is the ideal choice for most lifting operations.

The travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability.


Specification:
Wheel diameter: 250mm
Wheel base: 1.4m~3.5m
Max. wheel load: 100kN

(2017/Dec/11 14:50:07)]]> Mon, 11 Dec 2017 14:50:07 +0800 <![CDATA[End carriage for crane Brand:A-one End carriage for crane EC-320 (EC-320(A-one))(2017/Dec/11 14:50:21)]]> http://http://www.a-onecrane.com/EC6_5.html?CID=8_8 The A-ONE end carriage travel unit system is an advanced design of rail mounting assembly for moving loads at variable speed, and it is the ideal choice for most lifting operations.

The travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability.


Specification:
Wheel diameter: 320mm
Wheel base: 1.4m~4m
Max. wheel load: 120kN

(2017/Dec/11 14:50:21)]]> Mon, 11 Dec 2017 14:50:21 +0800 <![CDATA[End carriage for crane Brand:A-one End carriage for crane EC-400 (EC-400(A-one))(2017/Dec/11 14:50:35)]]> http://http://www.a-onecrane.com/EC6_6.html?CID=8_8 The A-ONE end carriage travel unit system is an advanced design of rail mounting assembly for moving loads at variable speed, and it is the ideal choice for most lifting operations.

The travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability.


Specification:
Wheel diameter: 400mm
Wheel base: 1.5m~5m
Max. wheel load: 180kN

(2017/Dec/11 14:50:35)]]> Mon, 11 Dec 2017 14:50:35 +0800 <![CDATA[End carriage for crane Brand:A-one End carriage for crane EC-500 (EC-500(A-one))(2017/Dec/11 14:50:51)]]> http://http://www.a-onecrane.com/EC6_7.html?CID=8_8 The A-ONE end carriage travel unit system is an advanced design of rail mounting assembly for moving loads at variable speed, and it is the ideal choice for most lifting operations.

The travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability.


Specification:
Wheel diameter: 500mm
Wheel base: 2m~5m
Max. wheel load: 225kN

(2017/Dec/11 14:50:51)]]> Mon, 11 Dec 2017 14:50:51 +0800 <![CDATA[End carriage for crane Brand:A-one End carriage for crane EC-630 (EC-630(A-one))(2017/Dec/11 14:51:07)]]> http://http://www.a-onecrane.com/EC6_8.html?CID=8_8 The A-ONE end carriage travel unit system is an advanced design of rail mounting assembly for moving loads at variable speed, and it is the ideal choice for most lifting operations.

The travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability.


Specification:
Wheel diameter: 630mm
Wheel base: 2m~5m
Max. wheel load: 500kN

(2017/Dec/11 14:51:07)]]> Mon, 11 Dec 2017 14:51:07 +0800 <![CDATA[Wheel block for crane and carriage Brand:A-one Wheel block for crane and carriage BW-12 (BW-12(A-one))(2017/Dec/11 14:51:22)]]> http://http://www.a-onecrane.com/BW1_2.html?CID=9_9 The A-ONE end carriage travel unit system is an advanced design of rail mounting assembly for moving loads at variable speed, and it is the ideal choice for most lifting operations.

The travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability.


Specification:
Wheel diameter: 125mm
Max. wheel load: 35kN 

(2017/Dec/11 14:51:22)]]> Mon, 11 Dec 2017 14:51:22 +0800 <![CDATA[Wheel block for crane and carriage Brand:A-one Wheel block for crane and carriage BW-16 (BW-16(A-one))(2017/Dec/11 14:51:34)]]> http://http://www.a-onecrane.com/BE1_6.html?CID=9_9 The A-ONE end carriage travel unit system is an advanced design of rail mounting assembly for moving loads at variable speed, and it is the ideal choice for most lifting operations.

The travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability.


Specification:
Wheel diameter: 160mm
Max. wheel load: 50kN

(2017/Dec/11 14:51:34)]]> Mon, 11 Dec 2017 14:51:34 +0800 <![CDATA[Wheel block for crane and carriage Brand:A-one Wheel block for crane and carriage BW-20 (BW-20(A-one))(2017/Dec/11 14:51:49)]]> http://http://www.a-onecrane.com/BW2_0.html?CID=9_9 The A-ONE end carriage travel unit system is an advanced design of rail mounting assembly for moving loads at variable speed, and it is the ideal choice for most lifting operations.

The travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability.


Specification:
Wheel diameter: 200mm
Max. wheel load: 80kN

(2017/Dec/11 14:51:49)]]> Mon, 11 Dec 2017 14:51:49 +0800 <![CDATA[Wheel block for crane and carriage Brand:A-one Wheel block for crane and carriage BW-25 (BW-25(A-one))(2017/Dec/11 14:52:13)]]> http://http://www.a-onecrane.com/BW_25.html?CID=9_9 The A-ONE end carriage travel unit system is an advanced design of rail mounting assembly for moving loads at variable speed, and it is the ideal choice for most lifting operations.

The travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability.

 

Specification:
Wheel diameter: 250mm
Max. wheel load: 100kN

(2017/Dec/11 14:52:13)]]> Mon, 11 Dec 2017 14:52:13 +0800 <![CDATA[Wheel block for crane and carriage Brand:A-one Wheel block for crane and carriage BW-32 (BW-32(A-one))(2017/Dec/11 14:52:29)]]> http://http://www.a-onecrane.com/BW3_2.html?CID=9_9 The A-ONE end carriage travel unit system is an advanced design of rail mounting assembly for moving loads at variable speed, and it is the ideal choice for most lifting operations.

The travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability.


Specification:

Wheel diameter: 320mm

Max. wheel load: 120kN

(2017/Dec/11 14:52:29)]]> Mon, 11 Dec 2017 14:52:29 +0800 <![CDATA[Wheel block for crane and carriage Brand:A-one Wheel block for crane and carriage BW-40 (BW-40(A-one))(2017/Dec/11 14:52:41)]]> http://http://www.a-onecrane.com/BW4_0.html?CID=9_9 The A-ONE end carriage travel unit system is an advanced design of rail mounting assembly for moving loads at variable speed, and it is the ideal choice for most lifting operations.

The travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability.


Specification:
Wheel diameter: 400mm
Max. wheel load: 180kN

(2017/Dec/11 14:52:41)]]> Mon, 11 Dec 2017 14:52:41 +0800 <![CDATA[Wheel block for crane and carriage Brand:A-one Wheel block for crane and carriage BW-50 (BW-50(A-one))(2017/Dec/11 14:52:56)]]> http://http://www.a-onecrane.com/BW5_0.html?CID=9_9 The A-ONE end carriage travel unit system is an advanced design of rail mounting assembly for moving loads at variable speed, and it is the ideal choice for most lifting operations.

The travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability.

 

Specification:
Wheel diameter: 500mm
Max. wheel load: 225kN

(2017/Dec/11 14:52:56)]]> Mon, 11 Dec 2017 14:52:56 +0800 <![CDATA[Crane bumper Brand:A-one Crane bumper dia.80, 100, 125, 160mm (BF-SERIES(A-one))(2019/Oct/25 11:00:51)]]> http://http://www.a-onecrane.com/Crane-bumper.html?CID=10_10 Fri, 25 Oct 2019 11:00:51 +0800 <![CDATA[Product Overview Brand:CHEC、A-one Product Features of LK-Series & NK-Series (LK&NK Series(CHEC&A-one))(2019/Oct/25 11:01:42)]]> http://http://www.a-onecrane.com/Product-Features-of-LK-Series--NK-Series.html?CID=11_11

Professional technology and precise gears
The steel surface of precise gears after heat treatment are ground by using ISO 6(DIN 6) or AGMA 12.
The tooth profile is effectively modified through professional technology to achieve highly efficient operation.

Shaft
Shaft is designed with the ability to accommodate bend intensity and torsion loads within the specifications. It is made with steel surface after heat treatment in order to make it operate smoothly and lastingly.
The deflection of the shaft is precisely calculated and properly modified to enable the gear wheel to engage with the gear shaft while loading. Both the input and output shaft sealing areas are specifically ground and hardened to make an effective and leakage-free sealing surface between the seal’s lip and the shafts.

Rigid Housing
We carefully select the suitable housing materials to fit application requirement. For example, a fitting gear is made by accurate machining. It allows horizontal mounting to suit

Bearing and Sealing
Long bearing lifetime.
Lasting sealing material is chosen to use.

Electrical motors and brake
Electrical motors can be supplied together with the gear box, and we also offer various voltages to suit every region.
Emergency stop brakes for operation are ideal. The safe brakes are used whenever a constant brake torque is in utmost operation.

Mounting flanges
The gear box can be equipped with mounting flange for easily mounting onto the drive.

Soft starting
The buffer helps the gear motor to start gently. It greatly reduces the wear of gears and increases the product life.


平行馬達減速機NK_LK

(2019/Oct/25 11:01:42)]]> Fri, 25 Oct 2019 11:01:42 +0800 <![CDATA[Product Overview Brand:CHEC、A-one Product Features of GM-Series (GM Series(A-one))(2019/Oct/25 11:02:48)]]> http://http://www.a-onecrane.com/Product-Features-of-GM-Series.html?CID=11_11

Professional technology and precise gears
The steel surface of precise gears after heat treatment are ground by using ISO 6(DIN 6) or AGMA 12.
The tooth profile is effectively modified through professional technology to achieve highly efficient operation.

Shaft
Shaft is designed with the ability to accommodate bend intensity and torsion loads within the specifications. It is made with steel surface after heat treatment in order to make it operate smoothly and lastingly.
The deflection of the shaft is precisely calculated and properly modified to enable the gear wheel to engage with the gear shaft while loading. Both the input and output shaft sealing areas are specifically ground and hardened to make an effective and leakage-free sealing surface between the seal’s lip and the shafts.

Rigid Housing
We carefully select the suitable housing materials (cast iron) to fit application requirement. For example, a fitting gear is made by accurate machining. It allows horizontal, vertical or upright mounting to suit the confines. Also, six direction oil holes within the interior of the housing are designed for easy oil filling/ drainage.

Bearing and Sealing
Long bearing lifetime.
Lasting sealing material is chosen to use.
Premium seal is also available for high temperature and corrosive environment.

Electrical motors and brake
IEC-standard electrical motors can be supplied together with the gear box, and we also offer various voltages to suit every region. Besides, other brands of electrical motors also can use it as long as the motors accord with IEC-standard. Modular concept motor flanges also allow cooling fans to be equipped within the flanges.

Cooling
The Fan design is a basic assembly within the motor. In addition, the special fan design for cooling system is available.

Brake
Emergency stop brakes for operation are ideal.
The safe brakes are used whenever a constant brake torque is in utmost operation.

Motor flange combination
Motor flanges are designed so that any IEC-motor between 63 and 132M can be combined with any gear boxes. Motor flanges for size 63, 71, 80, 90, 100, 112, 132 are fitted with the housing of the gear box through a modular flange adapter.

Mounting flanges
The gear box can be equipped with a standard mounting flange for easily mounting onto the drive. If required, special flanges also can be customized according to customer specifications.

(2019/Oct/25 11:02:48)]]> Fri, 25 Oct 2019 11:02:48 +0800 <![CDATA[Product Overview Brand:CHEC、A-one Product Features of EC-Series & BW-Series (EC&BW Series(A-one))(2017/Nov/30 10:46:43)]]> http://http://www.a-onecrane.com/Product-Features-of-EC-Series--BW-Series.html?CID=11_11 The A-ONE end carriage and wheel block travel unit system is an advanced design of rail mounting assembly for moving loads at variable speed, and it is the ideal choice for most lifting operations. The travel unit system is precisely engineered for outstanding performance and minimal maintenance proven under fully dynamic load tests. The strict testing and multi-stage quality control under the toughest conditions have ensured the maximum safety and reliability. The A-ONE traveling drive system is a perfect match for GM-SERIES Products.




Scope of supply
 

  • The steel structure with built-in wheel, buffers and buffer plates.
  • The material of steel wheels is S45C after heat treatment. In addition, 34CrMo4 (JIS-SCM435, AISI-4135) is available on request.
  • The material of the shaft is steel after heat treatment.
  • Long life bearings which are with lubricant provide the function of anti-friction.
  • The material of the bearing house is cast iron or steel.
(2017/Nov/30 10:46:43)]]> Thu, 30 Nov 2017 10:46:43 +0800